Easily Install OS X Lion On PC With UniBeast All-In-One Bootable USB Drive

The Apple’s renowned operating system OS X Loin can now be installed on your windows system. The process called hackinstosh will allow you to install the Macintosh Operating system on any desktop or laptop computer. Previously the process was quite long and frustrating because you had to install the Snow Leopard first then upgrade it to OS X Lion. However the great techie tonymacx86 has come up with a way to reduce such of type steps and even an optical drive would not be required.

Tonymacx86 has developed a project which converts your flash drive into a bootable operating system. Just plug n play. The project UniBeast All-in-one Bootable USB drive follows simple steps to setup your fresh operating system.

Creating a dual boot system will now be a child’s play and no need to worry about infected operating system any more. And enjoy the powerful Mac X OS Lion on you system as well.

You’ll need a copy of OS X Lion which can be downloaded from the Mac app store or got from the Lion USB flash drive. You’ll also need an 8GB (at least) flashdrive and finally download UniBeast from here.

RedmondPie explains the steps:

Step 1: Firstly, you’ll need to create a bootable USB drive using UniBeast. Open/Applications/Utilities/Disk Utility and highlight your USB drive on your Mac.

Step 2: Next, click the Partition tab, then Current and opt for 1 Partition. Then, click Optionsand select Master Boot Record.

Step 3: Change Name to ‘USB’ (can use any name, but we’ll use USB for the benefit of this tut), and select Mac OS Extended (Journaled) as your format. Once you’re done, selectApply followed by Partition.

NOTE: If you’re using the Install Mac OS X Lion Application, be sure to check that it’s been placed in the /Applications folder. If you’re instead using the OS X Lion USB Thumb Drive, plug it in.

Step 4: Download and run UniBeast. Continue through the first few steps.

Step 5: At Destination Select, click USB and then Continue.

Step 6: Select the package name of the method you’ll be using to install as depicted below. Laptop users will need to select the Laptop Support in addition. Once that’s done, hit Continue.

Step 7: Enter password and click Install. Depending on the speed of your system and the flash drive, it could take up to 15 minutes.

Step 8: Boot from your freshly prepared USB flash drive and install.

If you found this post useful, hopefully hit the +1 (recommend) button ?